Stainless flat bar for brackets, base plates, frames, grating and general fabrication. Polished flats are used for door frames, handrail infills and visible trim work.
| Grades available | 304 / 316 / 202 |
|---|---|
| Sizes | 12×3 mm to 200×25 mm |
| Thickness | 3 – 25 mm |
| Finish | Hot rolled or polished |
| Minimum order | 100 kg |
| Standard | ASTM A276 |
| Length | 6 m standard |
| Edges | Mill edge or dressed |
| Grades | 202, 304, 304L, 316, 316L |
Tap below and WhatsApp opens with this product, its grade and size already written. Add your quantity and send.
Get quote on WhatsAppEnter your size and we work out the theoretical weight using the density of the grade you pick.
Theoretical weight only. Mill rolling tolerance normally makes the delivered weight differ by 2–5%; we invoice on actual weighbridge weight.
What the metal is actually made of, as specified by the standard.
The default austenitic grade — about half of all stainless sold. Good corrosion resistance, easy to form and weld.
Strip shows the mid-point of each specified range, with iron as balance. The table below is the full specification.
| Element | Name | Specified % by weight | |
|---|---|---|---|
| C | Carbon | ≤ 0.070 | |
| Mn | Manganese | ≤ 2.00 | |
| Si | Silicon | ≤ 0.750 | |
| P | Phosphorus | ≤ 0.045 | |
| S | Sulphur | ≤ 0.030 | |
| Cr | Chromium | 17.50 – 19.50 | |
| Ni | Nickel | 8.00 – 10.50 | |
| N | Nitrogen | ≤ 0.100 | |
| Fe | Iron | Balance | ≈ 70.8% |
Limits as per ASTM A240 / A276. Always confirm against the mill test certificate for your consignment.
Cut-to-length, slitting and custom sections are done in-house. Send the drawing or the dimensions and we will confirm price and lead time.